Painless Performance

i'm new to the site and trying to frankenstien a 1971 c-10 with a 94 caprice ex-oklahoma highway patrol car(LT1) wondering what harness that i should use. dude i bought it from said he's already had the brain box tuned(to what i don't know). all i know is it'll do 130 mph with plenty of pedal left. i'm also tryin to build a custom gauge bezel using the digi gauge that came out of the car, and peice it in with other gauges. i plan on relocating the fuel tank f/m behind the seat to a fuel cell mounted b/tw the frame rails fishin for ideas bout cell with internal pumps and will they work with the wiring. any other ideas would be apriciated!

The harness you would need would be #60502

No problem about the wiring to the fuel pumps internal and external pumps wire the same way. I would however pay attention to the sending unit you use, make sure it matches that '93 Caprice cluster.

I looked over a couple schematics for that gauge cluster and it's suprisingly pretty staight forward, only a couple things run through special modules. If you can read a factory schematic that gauge cluster is certainly doable and sounds like a cool project.

thanks a million, hopefully will be gettin harness soon and gettin the blue blur on the road!!!

Sounds great