Call Tech Support 1-800-423-9696

Tech Support: 1-800-423-9696
Friday 11/24/2017
Closed for the holiday

 
23 Circuit Direct Fit Jeep YJ Harness By Painless Performance

P/N 10111

23 Circuit Direct Fit Jeep YJ Harness

       
 

  • Application
  • Specs
  • Larger Image
Year: 1987 - 1991
Make: Jeep
Model: YJ
Engine: Carbureted or Any Stand Alone Fuel Injection
Trans.: Any
American Made

 

This harness is formerly known as our 12 circuit kit. Click here to read about the recent changes.

This 23 circuit direct fit harness for 1987 to 1991 YJ Jeeps features a factory-style bulkhead connector that mounts the fuse block in the OEM location. This harness includes all the connectors and terminals needed. Included in this kit you will find a detailed manual and all of the wires are factory color coded and labeled for an easy install. NOTE: Factory EFI and emissions ICM are not supported. 

 

Number of Circuits: 23 Circuits - 12 Fuses w/ Horn Relay and Maxi Fuse
Harness Length: Factory Fitment
Fuse Type: Blade & Maxi Fuse
Firewall Passthrough: Bulkhead Connector
Color Code Based: Factory Jeep
Circuit Designations: Printed Wire Tags on all Connectors and Printed on Wire for Open Ended Wires
Connectors Included: Dimmer switch, speedometer, turn switch, ignition switch, gauge cluster, wiper switch, brake switch, wiper motor, tachometer, heater resistor, heater switch, tail lights, fuel tank, washer pump, horn, headlights, marker lights, blower motor and turn/park lights.

This harness includes circuits for:

  1. A/C & Heat
  2. Accessory / Cigarette Lighter
  3. Backup Lights
  4. Brake Lights
  5. Charging
  6. Dome and Courtesy Lights
  7. Electric Choke
  8. Electric Fuel Pump
  9. Emergency flashers
  10. Fan Relay Activation Power
  11. Fuel Injection Power 
  12. Fused Power Source
  13. Headlights
  14. Horn (Relay)
  15. Ignition Coil
  16. Instrument Panel Lighting and Gauges*
  17. Park Lights
  18. Radio/Clock (Constant and Switched) 
  19. Starting
  20. Tail Lights and License Plate Light
  21. Third Brake Light
  22. Turn Signals
  23. Wipers and Washer Pump (Front and Rear)

* Including Wires For:
Brake Warning Light
Four Wheel Drive Light
Fuel Gauge
HVAC Panel Lighting
Oil Gauge
Tachometer
Temperature Gauge

 23 Circuit Direct Fit Jeep YJ Harness By Painless Performance

 

 

ECM Flash Program

 

 

This is a basic start and run tune that we only recommend for a near stock application. We will only change the following parameters: delete VATS/PASS-KEY security, cooling fan on/off temperatures, rear end gear ratio, tire size, speed limiter, rpm limiter, idle rpm, and we will adjust the check engine light parameters. If your setup requires any other parameters tuned you will need to locate a local tuner. All ECMs are left unlocked to allow easy access for your tuner.

Step 1: Purchase one of the qualifying part numbers. See below for that list.


Step 2: If your part number is highlighted RED proceed to step 3B. If your part number is highlighted BLACK, proceed to step 3A.


Step 3A: If you have arrived at this step, your harness does not come with an ECM and you must provide one to be flashed. Please reference the manual with your harness to confirm the ECM part number required.


Step 4A: Once you have received your harness, please cut the Barcode label from the box as shown in the picture below.


Step 5A: Package and mail your ECM along with the Barcode label, a copy of your purchase receipt, and your ECM form that you are about to complete. (The address will be provided after you complete the form). We will pay for return ground shipping*. If you request a faster service, you will need to provide a return label.


Step 3B: If you have arrived at this step, your purchase comes with an ECM. You must fill out our ECM form BEFORE your purchase will ship. Proceed to Step 6.


Step 6: Click the “Start Here” button below to fill out our ECM questionnaire.


Step 7: Once we have the ECM, we will use the data from the form to flash the ECM. Then, once it has been flashed we will package the ECM and ship it back to you. If we encounter a question, we will contact you. This process can take 1-3 days.


Step 8: Once you receive your ECM, it is ready to go.

 

*Note: Our free return shipping is ONLY good for the lower 48 states, via ground UPS. If you are outside of those states, you must provide a return shipping label with your order. If your purchase comes with an ECM, the shipping will be covered via the retailer you purchased from.

 

 

Click the Start Here button below to get your FREE ECM Flash!

Click Here To Start The ECM Reflash Process

 

End Panel


APPLICABLE PAINLESS PART NUMBERS

60008

   

60522

60009

   

60523

60017

   

60524

60026

   

60526

60217

   

60608

60218

   

60617

60221

   

60700

60508

   

60701

60509

   

60702

60520

   

60710