Call Tech Support 1-800-423-9696

Tech Support: 1-800-423-9696
Tuesday 11/21/2017
Open today at 8AM

 
26 Circuit Direct Fit 1968 Chevelle / Malibu Harness By Painless Performance

P/N 20128

26 Circuit Direct Fit 1968 Chevelle / Malibu Harness

       
 

  • Application
  • Specs
  • Larger Image
Year: 1968
Make: Chevrolet
Model: Chevelle / Malibu
Engine: Carbureted or Any Stand Alone Fuel Injection
Trans.: Any
American Made

 

This harness gives you everything you need, plus more! Not only are there provisions for connecting standard factory components, we also provide what you will need for aftermarket components. Including options like a console sub-harness, two gauge cluster pigtails, and even a fully integrated ground circuit. This harness follows all of the same routing found on the factory harness which allows you to utilize the factory harness attachment points. Extra length has even been added to the headlight section to be routed behind the driver side inner fender for a cleaner look. Also available is a 120+ page manual full of color schematics, photos, and step-by-step instructions!

 

  • Numerous components have the connectors and terminals pre-installed to make connections plug-n-play
  • All exterior lights have the correct sockets and bulbs pre-installed
  • 6 gauge charge wire and 150 amp MIDI fuse
  • Fully integrated ground circuit
  • 120+ page manual full of color schematics, photos, and step-by-step instructions

Note: Options not supported in these harnesses are:  wiring for the TCS relay for turbo 400 transmissions, wiring for the factory power window/locks, and factory A/C wiring. These harnesses do include the switch power wire for the factory power window/locks and A/C. These harnesses do include a new blower motor harness for those with heat only systems. 

Here are some of the great features included with this kit. 

The heart of your new Chevelle wiring harness is centered around this factory style precision molded fuse block.  Updated ATC style fuses ensure that the 26 circuits stay protected and safe.

The backside of the fuse block utilizes a factory style bulkhead connector to ensure there is no trimming or cutting to your firewall.  This allows you to easily install the fuse block in the factory location.

Plug and play design makes install easy, no matter your options.  Don't have a center console but may add one later?  The included console harness can be easily added at any time.

Each pre-terminated connector is tagged for easy routing and installation. 

There is no need to make extra trips to the parts store with this kit.  Connectors, terminals, extra fuses, light bulbs, etc., all come in the box.  Any questions while installing?  Just refer to the complete 120+ page installation manual, or give our tech line a call!

 

 

Number of Circuits: 26

This harness includes circuits for:

  1. A/C & Heat
  2. Accessory
  3. Accessory / Cigarette Lighter 
  4. Backup Lights
  5. Brake Lights
  6. Charging
  7. Courtesy and Dome Light
  8. Electric Choke
  9. Electric Fuel Pump
  10. Emergency Flashers
  11. Fused Power Source
  12. Glove Box Light
  13. Headlights
  14. Horn (Relay)
  15. Ignition Coil
  16. Instrument Panel Lighting and Gauges*
  17. Park Lights
  18. Power Door Locks
  19. Power Windows
  20. Radio/Clock (Constant and Switched) 
  21. Starting
  22. Tail Lights and License Plate Light
  23. Trunk Light
  24. Turn Signals
  25. Under Hood Light
  26. Wipers and Washer Pump

* Including Wires For:

Aftermarket Gauge Power
Brake Warning Light
Fuel Gauge
Gear Indicator Light
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter

 26 Circuit Direct Fit 1968 Chevelle / Malibu Harness By Painless Performance

 

 

ECM Flash Program

 

 

This is a basic start and run tune that we only recommend for a near stock application. We will only change the following parameters: delete VATS/PASS-KEY security, cooling fan on/off temperatures, rear end gear ratio, tire size, speed limiter, rpm limiter, idle rpm, and we will adjust the check engine light parameters. If your setup requires any other parameters tuned you will need to locate a local tuner. All ECMs are left unlocked to allow easy access for your tuner.

Step 1: Purchase one of the qualifying part numbers. See below for that list.


Step 2: If your part number is highlighted RED proceed to step 3B. If your part number is highlighted BLACK, proceed to step 3A.


Step 3A: If you have arrived at this step, your harness does not come with an ECM and you must provide one to be flashed. Please reference the manual with your harness to confirm the ECM part number required.


Step 4A: Once you have received your harness, please cut the Barcode label from the box as shown in the picture below.


Step 5A: Package and mail your ECM along with the Barcode label, a copy of your purchase receipt, and your ECM form that you are about to complete. (The address will be provided after you complete the form). We will pay for return ground shipping*. If you request a faster service, you will need to provide a return label.


Step 3B: If you have arrived at this step, your purchase comes with an ECM. You must fill out our ECM form BEFORE your purchase will ship. Proceed to Step 6.


Step 6: Click the “Start Here” button below to fill out our ECM questionnaire.


Step 7: Once we have the ECM, we will use the data from the form to flash the ECM. Then, once it has been flashed we will package the ECM and ship it back to you. If we encounter a question, we will contact you. This process can take 1-3 days.


Step 8: Once you receive your ECM, it is ready to go.

 

*Note: Our free return shipping is ONLY good for the lower 48 states, via ground UPS. If you are outside of those states, you must provide a return shipping label with your order. If your purchase comes with an ECM, the shipping will be covered via the retailer you purchased from.

 

 

Click the Start Here button below to get your FREE ECM Flash!

Click Here To Start The ECM Reflash Process

 

End Panel


APPLICABLE PAINLESS PART NUMBERS

60008

   

60522

60009

   

60523

60017

   

60524

60026

   

60526

60217

   

60608

60218

   

60617

60221

   

60700

60508

   

60701

60509

   

60702

60520

   

60710