Call Tech Support 1-800-423-9696

Tech Support: 1-800-423-9696
Friday 11/24/2017
Closed for the holiday

 
60509 With Custom Flashed PCM By Painless Performance

P/N 60009

60509 With Custom Flashed PCM

       
 

  • Application
  • Specs
  • Larger Image
  • ECM Re-Flash
Year: 1997 - 2004
Make: General Motors
Model: Camaro, Firebird, Corvette
Engine: 5.7L LS1 / LS6 w/ Cable Throttle Body
Trans.: 4L60E, T-56
Free ECM Flash American Made

 

For installations of a mechanical throttle body LS1 / LS6 engine with a 4L60E or T-56 transmission.  These engines and transmissions were factory equipped in 1999 - 2002 Chevrolet Camaro.  This harness may also be used when a throttle by wire LS1 or LS6 from a Corvette is converted to mechanical throttle.  This kit includes a custom flashed, with your specifications, Powertrain Control Module and the 60509 harness which includes all connections for fuel injection and transmission operation: ECM, TPS, IAC, CTS, IAT, MAF, MAP, Injectors, Coils, CMP, CKP, Knock, VSS, Transmission, Front Bank 1 & 2 O2 Sensors.  Harness incorporates its own 8 circuit fuseblock with ignition relays and connection to factory style fuel pump relay.  Harness does not include any emissions related connections.  This standard length harness allows four feet from the back of the intake manifold to where the fuseblock and ECM mount.   Perfect for those that plan to mount these components under the dash or in the glove box.

 

 

 

 

Note:  It is required to do the following once you have purchased this 60009 part number.  Fill out the online computer flash form.  This form provides us the information we need to flash the powertrain control module to your specifications.  Click here to be taken to the ECM page.

Any questions regarding this Painless Performance part number, the computer flash form or computer programming should be directed to Dennis Diehl @ 1-800-423-9696

We recommend checking the online manual for the full list of required mating parts prior to ordering.  

 

Number of Circuits: 8 Fuses with 2 Ignition & 1 Fuel Pump Relay
Harness Length: 8 Feet Between Engine and ECM
Fuse Type: Blade
Firewall Passthrough: Grommet
Color Code Based: 2000 Camaro
Circuit Designations: Printed Wire Tags on all Connectors and Open Ended Wires
Connectors Included: ECM, TPS, IAC, CTS, IAT, MAF, MAP, Injectors, Coils, CMP, CKP, Knock, VSS, Transmission, Front Bank 1 & 2 O2 Sensors

This kit includes:

  1. All new fuel injection harness with OEM fitment connectors and harness breakouts
  2. Tested, Painted and Custom flashed PCM
  3. OBDII connector, mounting bracket and check engine light
  4. Crimp-on terminals, rubber grommet
  5. Mounting hardware
  6. Installation manual

 60509 With Custom Flashed PCM By Painless Performance

 

 

ECM Flash Program

 

 

This is a basic start and run tune that we only recommend for a near stock application. We will only change the following parameters: delete VATS/PASS-KEY security, cooling fan on/off temperatures, rear end gear ratio, tire size, speed limiter, rpm limiter, idle rpm, and we will adjust the check engine light parameters. If your setup requires any other parameters tuned you will need to locate a local tuner. All ECMs are left unlocked to allow easy access for your tuner.

Step 1: Purchase one of the qualifying part numbers. See below for that list.


Step 2: If your part number is highlighted RED proceed to step 3B. If your part number is highlighted BLACK, proceed to step 3A.


Step 3A: If you have arrived at this step, your harness does not come with an ECM and you must provide one to be flashed. Please reference the manual with your harness to confirm the ECM part number required.


Step 4A: Once you have received your harness, please cut the Barcode label from the box as shown in the picture below.


Step 5A: Package and mail your ECM along with the Barcode label, a copy of your purchase receipt, and your ECM form that you are about to complete. (The address will be provided after you complete the form). We will pay for return ground shipping*. If you request a faster service, you will need to provide a return label.


Step 3B: If you have arrived at this step, your purchase comes with an ECM. You must fill out our ECM form BEFORE your purchase will ship. Proceed to Step 6.


Step 6: Click the “Start Here” button below to fill out our ECM questionnaire.


Step 7: Once we have the ECM, we will use the data from the form to flash the ECM. Then, once it has been flashed we will package the ECM and ship it back to you. If we encounter a question, we will contact you. This process can take 1-3 days.


Step 8: Once you receive your ECM, it is ready to go.

 

*Note: Our free return shipping is ONLY good for the lower 48 states, via ground UPS. If you are outside of those states, you must provide a return shipping label with your order. If your purchase comes with an ECM, the shipping will be covered via the retailer you purchased from.

 

 

Click the Start Here button below to get your FREE ECM Flash!

Click Here To Start The ECM Reflash Process

 

End Panel


APPLICABLE PAINLESS PART NUMBERS

60008

   

60522

60009

   

60523

60017

   

60524

60026

   

60526

60217

   

60608

60218

   

60617

60221

   

60700

60508

   

60701

60509

   

60702

60520

   

60710