Call Tech Support 1-800-423-9696

Tech Support: 1-800-423-9696
Wednesday 11/22/2017
Closed Now

 
1996-99 GM Vortec 5.0 & 5.7L V8 (CMFI) Harness Extra Length By Painless Performance

P/N 60213

1996-99 GM Vortec 5.0 & 5.7L V8 (CMFI) Harness Extra Length

       
 

  • Application
  • Specs
  • Larger Image
Year: 1996 - 1999
Make: General Motors
Model: C & K Truck
Engine: 5.0L, 5.7L Central Multiport Fuel Injected
Trans.: 4L60E
American Made

 

This harness is designed for 1996-1999 5.0L & 5.7L Vortec CMFI engines with a 4L60E or 4L80E transmission. These engines were found in 1996-1999 GM full-size trucks, vans, and SUVs. Harnesses do not include connections for the rear O2 sensors or fuel tank pressure sensor but are available separate. Included with this harness is an 8 circuit modular fuse block and GM color coded wires with labels for easy installation. 

This kit includes:

  1. All new fuel injection harness with OEM fitment connectors and harness breakouts.
  2. OBDII connector, mounting bracket and check engine light.
  3. Crimp on terminals and rubber grommet.
  4. Mounting hardware.

This extended length harness allows eight feet from the back of the intake manifold to where the fuseblock and ECM mount. Perfect for those that plan to mount these components under the seat or in the center console.

This harness also requires the following mating parts; ECM #16244210 or 16229684 with V8 programing.

We recommend checking the online manual for the full list of required mating parts prior to ordering.  

 

Number of Circuits: 8 Fuses with 2 Ignition & 1 Fuel Pump Relay
Harness Length: 8 Feet Between Engine and ECM
Fuse Type: Blade
Firewall Passthrough: Grommet
Color Code Based: 1997 C1500 Truck
Circuit Designations: Printed Wire Tags on all Connectors and Open Ended Wires

The Fuse Block Protects The Following Circuits:

  • Canister Purge, EGR Valve, & Mass Airflow Sensor
  • Crank Position Sensor, Coil Module, & Ignition Coil
  • Data Link Connector
  • Dual 40 amp Ignition Relays
  • ECM (C4), ECM (C1), & Malfunction Indicator Lamp
  • Fuel Injectors
  • Fuel Pump, Oil/Fuel Pressure, & ECM
  • Heated O2 Sensors, Cam Position Sensor
  • Transmission, Brake Switch, & ECM (C3)

 

 

 

This harness includes connections for the following components:

Alternator 
Brake Switch
Cam Position Sensor
Canister Purge Solenoid
Canister Vent
Data Link Connector 
Distributor
Driver/Pass Front O2 Sensors
ECM
EGR Valve
Engine Coolant Temperature
Fuel Pump
Fuel Pump Relay
Fuel Pump Test 
Grounds 
Idle Air Control
Ignition Coil
Ignition Switch Signal
Ignition Coil Driver
Injectors
Intake Air Temperature Sensor
Knock Sensors
Malfunction Indicator Lamp
MAP Sensor
Mass Airflow Sensor
Oil Pressure
Starter
Tachometer
Throttle Position Sensor
Transmission
VSS Input
VSS Output 
VSS Output For Speedometer

 

 


For full factory emission controls purchase Painless Performance®™ part number 60320.  This emissions harness operates the rear O2 sensors and fuel tank pressure sensor.


If you plan to mount the ECM under or behind the passenger seat please see Painless Performance®™ part number 60213 as it provides 8 feet of harness length between the main engine breakout and the ECM connectors.


 1996-99 GM Vortec 5.0 & 5.7L V8 (CMFI) Harness Extra Length By Painless Performance

 

 

ECM Flash Program

 

 

This is a basic start and run tune that we only recommend for a near stock application. We will only change the following parameters: delete VATS/PASS-KEY security, cooling fan on/off temperatures, rear end gear ratio, tire size, speed limiter, rpm limiter, idle rpm, and we will adjust the check engine light parameters. If your setup requires any other parameters tuned you will need to locate a local tuner. All ECMs are left unlocked to allow easy access for your tuner.

Step 1: Purchase one of the qualifying part numbers. See below for that list.


Step 2: If your part number is highlighted RED proceed to step 3B. If your part number is highlighted BLACK, proceed to step 3A.


Step 3A: If you have arrived at this step, your harness does not come with an ECM and you must provide one to be flashed. Please reference the manual with your harness to confirm the ECM part number required.


Step 4A: Once you have received your harness, please cut the Barcode label from the box as shown in the picture below.


Step 5A: Package and mail your ECM along with the Barcode label, a copy of your purchase receipt, and your ECM form that you are about to complete. (The address will be provided after you complete the form). We will pay for return ground shipping*. If you request a faster service, you will need to provide a return label.


Step 3B: If you have arrived at this step, your purchase comes with an ECM. You must fill out our ECM form BEFORE your purchase will ship. Proceed to Step 6.


Step 6: Click the “Start Here” button below to fill out our ECM questionnaire.


Step 7: Once we have the ECM, we will use the data from the form to flash the ECM. Then, once it has been flashed we will package the ECM and ship it back to you. If we encounter a question, we will contact you. This process can take 1-3 days.


Step 8: Once you receive your ECM, it is ready to go.

 

*Note: Our free return shipping is ONLY good for the lower 48 states, via ground UPS. If you are outside of those states, you must provide a return shipping label with your order. If your purchase comes with an ECM, the shipping will be covered via the retailer you purchased from.

 

 

Click the Start Here button below to get your FREE ECM Flash!

Click Here To Start The ECM Reflash Process

 

End Panel


APPLICABLE PAINLESS PART NUMBERS

60008

   

60522

60009

   

60523

60017

   

60524

60026

   

60526

60217

   

60608

60218

   

60617

60221

   

60700

60508

   

60701

60509

   

60702

60520

   

60710