Call Tech Support 1-800-423-9696

Tech Support: 1-800-423-9696
Friday 11/24/2017
Closed for the holiday

 
2005-2006 GM LS2 Harness Std. Length - Throttle By Wire By Painless Performance

P/N 60520

2005-2006 GM LS2 Harness Std. Length - Throttle By Wire

       
 

  • Application
  • Specs
  • Larger Image
  • ECM Re-Flash
Year: 2005 - 2006
Make: General Motors
Model: Corvette, GTO, SSR, Crate Engine
Engine: 6.0L LS2 w/ 24X Crank Reluctor & 2X Cam Reluctor
Trans.: 4L60E, T-56
Free ECM Flash American Made

 

This harness is designed for the 2005 - 2006 throttle by wire LS2 engines using an LS1 / LS6 ECM and a 4L60E/4L65E automatic or T56 manual transmission. The engine must have a 24x crank reluctor (black). This harness will not work with a factory GTO ECM. This harness will only operate these LS2 engine codes:  ZJA, ZJB, 5MC, YTA and 6MC.  These engines were factory equipped in 2005 Corvette, 2005-2006 GTO and 2006 SSR and also available as a crate engine from GMP. Harnesses do not include any emissions related connections. Included with this harness is an 8 circuit modular fuse block and GM color coded wires with labels for easy installation.

This standard length harness allows four feet from the back of the intake manifold to where the fuseblock and ECM mount. Perfect for those that plan to mount these components under the dash or in the glove box.

This kit includes:

  1. All new fuel injection harness with OEM fitment connectors and harness breakouts
  2. OBDII connector, mounting bracket and check engine light
  3. Rubber grommet
  4. Mounting hardware

This harness also requires the following mating parts; ECM #12200411 (Painless # 60700); TAC Module #12578953; Accelerator Pedal #12565643. 

PLEASE NOTE: GM NO LONGER OFFERS THE ACCELERATOR PEDAL #12565643. THE SENSOR IS STILL AVAILABLE​ HOWEVER THE FULL ASSEMBLY IS NOT. WE RECCOMMEND SOURCING A PEDAL BEFORE PROCEDING WITH YOUR PROJECT. 

We suggest trying a certified used parts supply such as lkqcorp.com

 

Purchase this harness today and qualify for Painless Performance®™ to flash your ECM for free.  Click here for details.

We recommend checking the online manual for the full list of required mating parts prior to ordering.  

 

Number of Circuits: 8 Fuses with 2 Ignition & 1 Fuel Pump Relay
Harness Length: 4 Feet Between Engine and ECM
Fuse Type: Blade
Firewall Passthrough: Grommet
Color Code Based: 2002 Corvette
Circuit Designations: Printed Wire Tags on all Connectors and Open Ended Wires

The Fuse Block Protects The Following Circuits:

  • DLC B+
  • Driver Side Injectors and Coils
  • Dual 40 amp Ignition Relays
  • ECM and Malfunction Indicator Lamp
  • ECM B+
  • Fuel Pump
  • Heated O2 Sensors, Mass Airflow Sensor, & Brake Switch
  • Pass Side Injectors and Coils
  • Transmission and TAC Module

 

This harness includes connections for the following components:

  • Accelerator Pedal Position Sensor
  • Alternator 
  • Brake Switch
  • Cam Position Sensor
  • Clutch Pedal Position 
  • Crank Position Sensor
  • Cruise Control
  • Data Link Connector 
  • Driver/Pass Front O2 Sensors
  • Driver/Pass Knock Sensors
  • ECM
  • Engine Coolant Temperature
  • Fan #1 Relay Ground ECM Activation
  • Fan #2 Relay Ground ECM Activation
  • Fuel Pump
  • Fuel Pump Relay
  • Fuel Pump Test 
  • Gear Indicator Switch
  • Grounds 
  • Ignition Coils
  • Ignition Switch Signal
  • Injectors
  • Malfunction Indicator Lamp
  • MAP Sensor
  • Mass Airflow / Intake Air Temperature Sensor
  • Oil Pressure Sensor
  • Reverse Lockout Solenoid 
  • Skip Shift Light 
  • Skip Shift Solenoid 
  • Starter
  • Throttle Actuator Control Module 
  • Throttle Actuator Control Module to Accelerator Pedal Pigtail
  • Tachometer
  • Throttle Body 
  • Transmission
  • Vehicle Speed Sensor
  • VSS Output for Speedometer

 

 2005-2006 GM LS2 Harness Std. Length - Throttle By Wire By Painless Performance

 

 

ECM Flash Program

 

 

This is a basic start and run tune that we only recommend for a near stock application. We will only change the following parameters: delete VATS/PASS-KEY security, cooling fan on/off temperatures, rear end gear ratio, tire size, speed limiter, rpm limiter, idle rpm, and we will adjust the check engine light parameters. If your setup requires any other parameters tuned you will need to locate a local tuner. All ECMs are left unlocked to allow easy access for your tuner.

Step 1: Purchase one of the qualifying part numbers. See below for that list.


Step 2: If your part number is highlighted RED proceed to step 3B. If your part number is highlighted BLACK, proceed to step 3A.


Step 3A: If you have arrived at this step, your harness does not come with an ECM and you must provide one to be flashed. Please reference the manual with your harness to confirm the ECM part number required.


Step 4A: Once you have received your harness, please cut the Barcode label from the box as shown in the picture below.


Step 5A: Package and mail your ECM along with the Barcode label, a copy of your purchase receipt, and your ECM form that you are about to complete. (The address will be provided after you complete the form). We will pay for return ground shipping*. If you request a faster service, you will need to provide a return label.


Step 3B: If you have arrived at this step, your purchase comes with an ECM. You must fill out our ECM form BEFORE your purchase will ship. Proceed to Step 6.


Step 6: Click the “Start Here” button below to fill out our ECM questionnaire.


Step 7: Once we have the ECM, we will use the data from the form to flash the ECM. Then, once it has been flashed we will package the ECM and ship it back to you. If we encounter a question, we will contact you. This process can take 1-3 days.


Step 8: Once you receive your ECM, it is ready to go.

 

*Note: Our free return shipping is ONLY good for the lower 48 states, via ground UPS. If you are outside of those states, you must provide a return shipping label with your order. If your purchase comes with an ECM, the shipping will be covered via the retailer you purchased from.

 

 

Click the Start Here button below to get your FREE ECM Flash!

Click Here To Start The ECM Reflash Process

 

End Panel


APPLICABLE PAINLESS PART NUMBERS

60008

   

60522

60009

   

60523

60017

   

60524

60026

   

60526

60217

   

60608

60218

   

60617

60221

   

60700

60508

   

60701

60509

   

60702

60520

   

60710