Year: 1966 - 1976
Make: Ford
Model: Galaxie, LTD, Falcon, Fairlane, Mustang, Maverick, Torino and Ranchero
Engine: Non Fuel Injected
Trans.: Non Electronic
Designed for 1966 - 1976 Ford muscle cars including Galaxie, LTD, Falcon, Fairlane, Mustang, Maverick, Torino and Ranchero this 14-circuit universal harness features Ford OEM color codes and our unique covered micro-fuse block. Harness also features an auxiliary circuit with 20 amp relay for accessories such as fog lights, electric seats, electric window / lock or an electric fuel pump.
Number of Circuits: 12 Fuses w/ Horn Relay, Accessory Relay and Maxi Fuse
Harness Length: Universal
Fuse Type: Mini Blade & Maxi Fuse
Firewall Passthrough: Multiple Grommet
Color Code Based: Factory Ford
Circuit Designations: Printed on Wires
This harness includes circuits for:
- Headlight Switch- Power to headlight switch. Power wires out of headlight switch to head light dimmer switch, tail lights, dash lights and park lights.
- Dimmer Switch wires include power from headlight switch and power out to low and high beam headlights.
- Wiper Switch- Power to wiper switch.
- Turn Signal Switch- Power into and out of your column mounted turn signal switch. This harness kit includes new terminals for the turn signal switch. You must retain the factory connector.
- Ignition Switch- Power into and out of to fuse block (ignition, crank and accessory)
- Brake Switch- Power into and out of brake switch.
- Courtesy Lights- Power and ground circuits for dome light activation.
- Alternator- Charge wire and alternator field activation wires from regulator (connector included). (Most alternators can easily be wired up to this Painless harness). Included in kit is a high output alternator wire that allows you to use up to a 140 Amp alternator.
- Horn- 20 Amp horn relay mounted to fuseblock
- Radio- Harness includes constant B+ (for preset memory) and ignition hot circuits for any aftermarket or factory radio.
- Starter- Crank signal wire for starter solenoid.
- Engine section wires including electric choke, coil power, coil to tach signal, oil pressure, engine temperature, and A/C compressor clutch control wire.
- Headlight section wires including right and left high and low beam headlights, turn signals and park lights. This harness kit includes six two-pin molded rubber connectors to replace the factory park and turn lights inline connectors.
- Tail section wires including tail lights, brake lights, turn signal lights, fuel gauge sender, third brake light, and reverse lights.
- Dash panel section wires including fuel, temperature, oil pressure, voltage, tachometer, speedometer, high beam and turn indicators and gauge illumination.
- Also included in kit is a fuseblock mounting bracket, rubber grommet, 4 inch zip ties, 70 Amp maxi fuse and a large assortment of crimp style connectors.
Most important of all we provide an illustrated installation manual that equips you with the needed information to install the harness to your vehicle. If you get stuck during the installation just give our tech line a call. They have an immense data base of vehicle specific information.
NOTE: THIS HARNESS WILL NOT WORK ON THUNDERBIRDS
