1990-92 GM V8 TPI Harness (MAP) Std. Length P/N 60103

1990-92 GM V8 TPI Harness (MAP) Std. Length By Painless Performance

$499.90

Recommended Products


1990-92 GM V8 TPI Harness (MAP) Extra Length


Vehicle Speed Sensor (MAP TPI)


Weld In Oxygen Sensor Fitting


GM Coil To Distr. Harness

We also Suggest these Parts

Application
Specs

Part Number: 60103 Engine: 5.0L, 5.7L Tuned Port Injection w/ Manifold Absolute Pressure Sensor (MAP) Trans.: 200-4R, 700-R4 and Other Non-Electronic

This harness is standalone and is not intended to replace the OEM engine wiring. Standalone harnesses are intended to run the designated engine & transmission only, generally when swapped into another vehicle.

This harness is designed for 1990 - 1992 Tuned Port Injected TPI 5.0L /5.7L V8 engines using the MAP speed density system. These engines were factory equipped in Chevrolet Camaro and Corvette and were mated to either a 200-4R or 700R4 transmission. Harnesses do not include all the orginal connections for the the orginal emissions but are available separate, see the specs page for more details. Also available for this harness is a detailed step-by-step manual, and GM color coded wires with labels for easy installation.

This harness also requires the following mating parts; ECM #1227730, #16198262, or #88999196. The EPROM broadcast code must match tire diameter, gear ratio, engine size, and transmission.

We recommend checking the online manual for the full list of required mating parts prior to ordering.

Prop 65 Warning

Hazardous Material Warning

WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Harness Length: 4 Feet Between Engine and ECM
Fuse Type: Blade
Firewall Passthrough: Grommet
Color Code Based: 1990 Camaro
Circuit Designations: Printed Wire Tags on all Connectors and Open Ended Wires

Connections Included:

ECM, MAP, O2, TPS, OPS, IAC, IAT, CTS, Knock, Injectors, Distributor, OBD1 w/SES light, VSS and TCC solenoid

This harness includes connections for the following components:
A/C Power
Brake Switch
Data Link Connector
Distributor
ECM
EGR Valve
Engine Coolant Temperature
Fan Relay Ground
Fuel Pump
Fuel Pump Relay
Fused System Power
Grounds
Idle Air Control
Ignition Switch Signal (Fused)
Ignition Timing Setting
Injectors
Knock Sensor
Malfunction Indicator Lamp
Manifold Air Temperature
MAP Sensor
O2 Sensor
Oil Pressure
Park/Neutral Indicator Switch
Starter
Throttle Position Sensor
Torque Converter Clutch
VATS
VSS

#60314- In states/counties which require all the original emission equipment to be installed, Painless offers this emission harness for the 60103 harness. This harness activates the Air Port solenoid Control, Air Diverter Solenoid and Canister Purge Solenoid.

If you plan to mount the ECM under or behind the passenger seat please see Painless Performance®™ part number 60203 as it provides 8 feet of harness length between the main engine breakout and the ECM connectors.

Installs which have an external coil distributor:

#60124- This pigtail will be required in order to connect the coil to the distributor.

#60125- This pigtail will be required in order to connect the power to the coil and will provide a tach signal from the coil.

CUSTOMERS WHO BOUGHT THIS ITEM ALSO BOUGHT

60203