Open today at 8AM CDT

Support 1.800.423.9696

1999-2006 GM Gen III 4.8/5.3/6.0L Integrated EFI & Chassis Harness - Mech. TB 60617


WarningProp 65 Warning
Hazardous Material Warning

WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit

  • Application
  • Specs
Part Number: 60617
Year: 1999 - 2006
Make: General Motors
Model: C & K Truck/SUV
Engine: 4.8L, 5.3L, 6.0L w/ Mechanical Throttle Body
Trans.: 4L60E


Our integrated EFI/Chassis harnesses are the perfect solution for anyone doing a complete rewire of a vehicle as well as transplanting a GM Gen III fuel injected engine. This kit is designed for use on 1999-2006 4.8L, 5.3L, & 6.0L Vortec truck engines with a 4L60E transmission. The chassis wiring and fuel injection wiring are fully integrated into a single 26 circuit/7 relay fuse block, eliminating the need to have separate fuses and relays for the fuel injection. The chassis harness connections are the same GM color coded connections as our 10201 kit. The fuel injection connections include the same labels connections as our 60217 harnesses. These harnesses do not support flex fuel engines and require the use of a mechanical throttle body. Included in this kit you will also find all the required terminals & connectors for easy installation.   

This harness also requires the following mating parts; ECM #12200411 (Painless # 60700)

We recommend checking the online manual for the full list of required mating parts prior to ordering.  

Number of Circuits: 26 Fuse with 7 Relays
Fuse Type: Mini Blade & Maxi Fuse
Firewall Passthrough: Multiple Grommet
Color Code Based:  Fuel Injection 2000 Camaro / Chassis Universal GM
Circuit Designations: Printed Wire Tags on all Connectors and Printed on Wire for Open Ended Wires

This harness has the following chassis connections:

  1. A/C & Heat
  2. Accessory / Cigarette Lighter
  3. Backup Lights
  4. Brake Lights
  5. Charging
  6. Cruise Control
  7. Courtest & Dome Light
  8. Electric Fuel Pump
  9. Emergency Flashers
  10. Cooling Fan Relay #1
  11. Cooling Fan Relay #2
  12. Fused Power Source
  13. Headlights
  14. Horn Relay
  15. Ignition Coil
  16. Instrument Panel Lighting and Gauges
  17. Park Lights
  18. Power Antenna
  19. Power Door Locks
  20. Power Windows
  21. Radio/Clock (Constant and Switched) 
  22. Starting
  23. Tail Lights
  24. Third Brake Light
  25. Turn Signals
  26. Wipers

The fuel injection harness includes connections for the following components:

  • A/C Compressor
  • Alternator 
  • Cam Position Sensor
  • Coolant Temperature Gauge
  • Crank Position Sensor
  • Data Link Connector 
  • Driver/Pass Front O2 Sensors
  • Engine Coolant Temperature
  • Fuel Pump Relay
  • Grounds 
  • Idle Air Control
  • Ignition Coils
  • Ignition Switch Signal
  • Injectors
  • Knock Sensors
  • Malfunction Indicator Lamp
  • MAP Sensor
  • Mass Airflow Sensor / Intake Air Temperature Sensor
  • Oil Pressure Gauge
  • ECM
  • PRNDL Switch
  • Starter
  • Tachometer
  • Throttle Position Sensor
  • Transmission
  • Vehicle Speed Sensor
  • VSS Output for Speedometer